환기나라

Q&A

home › 고객센터 › Q&A
환기나라 Q&A
제목 Fitting Cat Flap in UPVC Door Panel
작성자 Carmen 작성일 24-10-22 06:31
Cat flaps allow your pet to leave and come back as they please without you needing to let them in or out. They also prevent your cat from urinating in the home.

It is much easier to put the cat flap on a upvc panel than a glass one however, you'll need some skills and the appropriate tools.

Window-Repairs.-150x150.jpgTake a measurement of the door

Installing a cat flap on the door can be a challenge but if you choose the right type of cat flap, take your time and follow the directions provided, it should not prove to be too difficult. We will show you how to draw the shape, then use an jigsaw for cutting out the area in the door and then finish off the job by attaching the cat flap to the door. This will ensure that the flap remains in place and shields the door from rain and wind which can cause damage.

The first step is determine the width of your pet in order to determine an accurate estimate of the size of cat flap you will need. This will ensure that the flap is big enough to allow your pet to leave and enter the home without having to open or close the door each time, but also small enough to prevent the pet from straying too far either way.

Once you have the measurements, you can mark the area on the door where the template should be positioned, usually this is done with an X, however some kits come with a drawing that shows where to drill, if yours does, then you can stick it to the door and draw a line around it. If your door has moulding or a sill at the bottom, make sure you leave plenty of space between your cat and these elements.

Put on your eye protection and dust mask, and using a jigsaw, begin cutting along the line that you penciled in. Don't push the blade too hard, as this could cause it to cut faster than you'd like it to. Use a set square to ensure that you are cutting the material correctly and that the hole is a rectangle shape. When you are happy with the result, you are able to remove the remaining door material.

Draw a Line

The cat flap is a great method to let your pet in and out without having to worry about them coming in with a visitor, or leaving unwanted gifts in the house. It also stops draughts and keeps your home's temperature stable. However, putting a cat flap in your door could be an intimidating task for those who haven't done it before, which is why many people to call a professional joiner or carpenter to do the job instead. It is an option, but you can do it yourself if your tools are appropriate and the steps are adhered to.

While this is much simpler to accomplish with a wooden door, it is still possible to do this in uPVC doors, though you need to be very cautious not to damage the doors, as this can invalidate the warranty. The first step is to take measurements of the door, making sure that it will be able to accommodate the new cat flap. If you have an ordinary upvc door panel cat flap panel, this should be easy. However in the case of composite or a different type of door, you might have to be more cautious.

The next step is to determine the height of your cat flap fitters's stomach. This is the distance between the floor and the underside of your cat's stomach. You will need to locate a space on the door that will allow your pet to move through easily. Once you've got the information you'll have to mark the area with a spirit-level and a pencil so that you are certain that the hole will fit your cat.

After you have marked the area, it's time to cut the hole. You will need to use an jigsaw. It is important that you take your time in order to ensure that the cuts are smooth and clean, rather than uneven and rough, as this could damage your door. Be sure to wear safety glasses and a dust protection mask whenever working with the jigsaw as inhaling the sawdust could be hazardous to your health. Once you've finished cutting the hole, you'll require sandpaper to smooth the edges so that the cat flap is easily fitted into place.

Make a hole

Installing a cat flap to an existing door panel or double glazing sealed unit can be quite difficult. You may be tempted to do it yourself, but unless you have experience in DIY it is recommended to hire a professional in to do the task for you. A mistake in the process may not just be ugly, but it could also be an enigma for security and also allow cold air to enter when the cat is outside, and hot air to escape when inside.

The hole's location should be marked on the door using an eraser and a spirit level. This will ensure that it is positioned correctly and aligns with the door's other parts. You should make sure you have some sandpaper on the ready to smooth any edges.

Once the line has been drawn, you can cut the hole using a jigsaw. Be sure to wear any safety equipment for working with an electric tool. If you're worried about the noise, you can purchase an electric jigsaw that is quieter and more user-friendly.

You should only remove the material required to fit the cat flap. It is necessary to leave some extra material to make the wall thickness of the cat flap. However cutting away too much could cause problems or even damage the frame of the door.

A door made of upvc could contain a metal frame or a panel inside which could block the microchip cat flap if this is the case you will need to cut an oversize hole so that the metal does not get in contact with the wall of the cat flap. If this is done it is crucial to fill in the oversize gap and render it watertight.

If you're planning to install a cat flap into a upvc door or double glazed window with a metal frame then you'll need to speak to a professional who can supply you with a new pane of glass with the hole for the cat flap already drilled in it. It is much less expensive to get this done rather than trying to fix the cat flap onto an existing pane of glass that has not been manufactured specifically for the purpose.

Place the Flap

cat flap installation cost near me flaps let your pet move around whenever they want, allowing them the ability to unwind inside the house whenever they're feeling like it. If you have a uPVC front door, it may be difficult to install the cat flap. This is particularly true when you don't have an glass panel that can be cut. If you're willing to buy and install a half-glazed replacement uPVC panel then it is possible to fit an animal flap onto the doors. It's not a matter of slicing an opening in the door. You'll also need to perform a few steps to ensure that the door is safe.

A composite, uPVC, or GRP door panel is generally comprised of a thin plastic skin that is attached to an insulating polystyrene core. The material is extremely fragile and care should be taken when cutting into it to avoid damaging. This kind of door typically comes with a template drawing which you can use as a guide to cut the hole into your door.

After you've marked the position of the hole in your door, now it's time to put in the cat flap. You can buy and fit many different models including basic push-button operated ones to microchip activated units that allow access only to your pet. But, regardless of the kind of cat flap you choose it's important to make sure that your cat can comfortably use the flap and not get stuck outside in the rain.

A circular fitting cat flap in upvc Door panel is better than a square because circles can be cut more securely into the glass. This is because square holes make the glass more susceptible to cracking if a drill is used on it. It's also a much safer option as you're not at risk of drilling into toughened glass that could shatter and hurt your pet or your family. This is particularly important if there are elderly or children at home who could be hurt by glass shards.